# Anoush

- [Week 11-19](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19.md)
- [Week 11 | project kick-off](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19/week-11-or-project.md)
- [Week 14 | First experiments](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19/week-12-or.md)
- [Week 15 | Progress presentation](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19/week-15-or.md)
- [Last reframing session](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19/last-reframing-session.md)
- [Trail of Evidence](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-11-19/trail-of-evidence.md)
- [Week 1-8](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8.md)
- [Overall Reflection](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/overall-reflection.md)
- [Week 8 | Untoolkit - Electronic Outputs](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-8-output.md): This week we continue to untoolkit technological making processes. Besides designing our own inputs, we will now increase our coding prowess by building our own outputs too.
- [Week 7 | Transforming bioplastics](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-7-transforming-bioplastics.md): This week was all about bioplastics. We learned the four steps of designing materials and cooked our own homemade bioplastics.
- [Week 6 | Untoolkit - Electronic inputs](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-6-untoolkit-electronic-inputs.md): This week, I am working with Desiree van Dam on a project with an Arduino Uno. We will make some digital and analog sensors.
- [Week 5 | Additive Manufacturing](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-5.md): This week we got acquainted with the 3D printer and 3D modeling with Fusion. The assignment is to make three different molds that can be used in week 7. I did this assignment together with Kim.
- [Week 4 | Cutting Supersurfaces](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-4.md): This week we are introduced to the lasercutter. The aim is to create a 3D object series (with a minimal of 5 gradations) based on two extremes. For me, these were wide and narrow.
- [Week 3 | Reading Week](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-3.md)
- [Week 2 | Electronics: Connecting Materials](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-2.md): This week is the first week where we really got started. The assignment is to assemble a working speaker. We will experiment with coils and materials that may make the speaker sound louder.
- [Week 1 | Kick-off](https://minormakerslab.gitbook.io/students-1920/andrei/anoush/week-1-8/week-1.md): The first week of the minor Makers Lab 2020 consisted some workshops and excursions to get to know our class and understand the definition of a maker.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://minormakerslab.gitbook.io/students-1920/andrei/anoush.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.