LogoLogo
  • Documentation Pages
  • About Minor Makers Lab
  • Documentation templates
    • Recipe template
    • Label templates
    • Ingredient template
  • Projects
    • Project overview
      • Gelance Cushion - Andrei Motian
      • Landscapes for Warhammer - Dusanka Prvulovic
      • Bioplastic Filters: An Analogue Photoshop - Daniël van Kesteren
      • Hyperdisposables - Anoush Mazloumian
      • Project Stop Touching - Summer Danoe
      • Foam For Material Activists - Laura Velgersdijk
      • DateKleed - Duncan van Norden
      • One Size Hurts All - Kaz Bison
      • Biodegradable Packaging Bags - Kim Sinke
      • DIY Faceguards - Thijs Uffen
      • Bioplastics on a Rainbow Spectrum - Desiree van Dam
      • Beyond Humanity - Britt de Heer
  • Coursework
    • Britt
      • research zine text
      • Week 11
      • Week 12 / 13
      • Week 14
      • 1 ) Kick-Off
        • Grafische Werkplaats Amsterdam
        • Safetyzine
      • 2 ) Electronics: Connecting Materials
      • 4 ) Cutting Supersurfaces
        • Zine: Art Approach
        • Furry Sample Book
      • 5 ) Additive Manufacturing
      • 6 ) Untoolkit: Electronic Inputs
      • 7 ) Transforming: Moulding and Casting with Bioplastics
      • 8 ) Untoolkit: Electronic Outputs
    • Andrei
      • Week 1
        • GWA
        • Textielmuseum
        • Safetyzine
      • Week 2
        • Ohm's Law & circuits
        • Speaker on denim
      • Week 4
        • Inflatables 2D to 3D
        • Smooth to sharp with polypropylene
      • Week 5
        • Making a switch for the laser cutter in Fusion360
        • Designing and 3D printing molds
      • Week 6
        • Wearable switch for sound
        • Analog Sensor
      • Week 7
        • Home materials
        • Making bioplastics
        • Material properties
      • Week 8
        • Virtual Swatch
        • Processing
        • RGB LED
      • Project weeks 11 - ?
        • Week 11: Kick-off
          • Brainstorm Session
          • 5 min pitch
          • Trail of Evidence
          • Proposal
        • Week 12: Experimenting
          • Research workout materials
          • First Experiment
          • Trail of Evidence
        • Week 13: Project Work
          • Insights
          • Reframing session with Laura
          • Trail of Evidence
        • Week 14: Reframing
          • Reflective design method
          • Going bigger
          • Trail of Evidence
        • Week 15
          • Highlights photo's
          • Reframing, research & insights
          • Trail of Evidence
        • Week 16
          • Going even bigger
          • Trail of Evidence
        • Week 17
          • Trail of Evidence
        • Project
    • Anoush
      • Week 11-19
        • Week 11 | project kick-off
        • Week 14 | First experiments
        • Week 15 | Progress presentation
        • Last reframing session
        • Trail of Evidence
      • Week 1-8
        • Overall Reflection
        • Week 8 | Untoolkit - Electronic Outputs
        • Week 7 | Transforming bioplastics
        • Week 6 | Untoolkit - Electronic inputs
        • Week 5 | Additive Manufacturing
        • Week 4 | Cutting Supersurfaces
        • Week 3 | Reading Week
        • Week 2 | Electronics: Connecting Materials
        • Week 1 | Kick-off
    • Daniël
      • Week 20: Expo Week
      • Week 19: Project Week 9
      • Week 18: Project Week 8
      • Week 17: Project Week 7
      • Week 1: Kick-Off
      • Week 2: Electronics and Connecting Materials
        • Part I: The Basics and Recreating Circuits
        • Part II: The Making of the Speaker
        • Part III: Testing the speaker
      • Week 3: Reading Week
      • Week 4: Processes & Collaboration
        • Part I: exploring the words
        • Part II: experimenting with the laser cutter
      • Week 5: Critical Making 3D
        • Part I: Creating the injection mold
        • Part II: Creating the two-part mold
        • Part III: Printing the designs
      • Week 6: Electronics & Open Design
      • Week 7: Bioplastics
        • Material Properties Sheet
        • The Ma2E4 Toolkit
        • The Ma2E4 Toolkit (second bioplastic)
        • An application for the bioplastic
      • Week 8: Interfaces & Algorithmic Bias
      • Week 9: Documentation Week
      • Week 10: Assessments
      • Week 11: Project Kick-Off
      • Week 12: Recess
      • Week 13: Project Week 2
      • Week 14: Project Week 3
      • Week 15: Project Week 4
      • Week 16: Project Week 5
        • Presentation Preparation
    • Desiree
      • Summaries
      • Kick-off
      • Week 1 - Safety Zine
      • Week 2-3 Electromagnets
      • Week 4 - Cutting Supersurfaces
      • Week 5 - Additive Manufacturing
      • Week 6 - Untoolkit: Electronic Inputs
      • Week 7 - Transforming: Molding and Casting with Bioplastics
      • Week 8 - Untoolkit: Electronic Outputs
      • Trail of Evidence
      • Website
      • Material Archive
      • Week 11 - Choose a project
      • Week 12 - 13
      • Week 14
      • Week 15
      • Week 16
      • Week 17
      • Week 18
      • Week 19
    • Duncan
      • Week 1: Kick-Off
        • Masterclass Studio Overvelde
        • Workshop letterpress
        • Textielmuseum Tilburg
        • Meet the Makers - introduce yourself
        • Safetyzine
        • extra´s
      • Week 2: Electronics: Connecting Materials
        • Zine: Kits & Open sources
      • Week 3: Reading week
      • Week 4: Cutting Supersurfaces
        • Zine:
      • Week 5: Additive Manufacturing
        • Workshop Amstelstation
        • Zine: 3D-printers & Being editors
        • Overall conclusion
      • Week 6: Untoolkit (Inputs)
        • Together w/ Loes
        • Zine: week 6
        • Extra´s
      • Week 7: Transforming
        • Zine: Social issues
        • extra's
      • Week 8: Untoolkit (Outputs)
        • Zine: Does being a 'maker' makes you a better civilian?
        • extra´s: week 8
      • Week 9: Reflection
        • Zine:
        • extra's (week 9)
      • Week 10: Assessments
        • Zine:
      • Week 11
        • Makers skills & attitude
        • Design research skills
        • Collaborative learning
      • Week 12
        • Maker skills & attitude
        • Design research skills
        • Collaborative learning
      • Week 13
        • Scenario
        • Maker skills & attitude
        • Design research skills
        • Collaborative learning
      • Week 14
      • Week 15
        • Materialen lijst
        • Lijst met verschillende manier van connecten
        • Scenarios
        • Inspiratie voor vormen
        • Concrete voorbeelden tekenen
        • Samples / plan schrijven om te MAKEN!!
        • Kleuren inspiratie
      • Week 16
      • Week 18
        • Samples
        • The making of Samples
        • Inspiratie
        • Benodigdheden Woensdag 03/06/20
        • Inspiratie foto serie
        • Digitale tekeningen
      • Week 19
      • Week 20
    • Dušanka
      • Week 1 - 8
        • 1 | Kick-Off
          • 2 | Electronics: Connecting Materials
            • Assignment 0 - Zine
            • Assignment 1 - Paper circuit
            • Assignment 2 - Soft speaker
          • Assignment 1
          • Assignment 2
        • 4 | Cutting Supersurfaces
          • Assignment 0 - Zine
          • Assignment 1 - Sample Book
        • 5 | Additive Manufacturing
          • Assignment 0 - Zine
          • Assignment 1 - Mold documentation
          • Assignment 2 - Molds
        • 6 | Untoolkit: Electronic Inputs
          • Assignment 0 - Zine
          • Assignment 1 - Antiprimadonna's
          • Assignment 2 - Working circuit
        • 7 | Transforming: Molding and Casting with Bioplastics
          • Assignment 0 - Zine
          • Assignment 1 - Intro
            • Bioplastics
            • Experiential toolkit
            • Material properties sheet
            • Future applications
            • Reflection
        • 8 | Untoolkit: Eelectronic Outputs
          • Assignment 0 - Zine
          • Assignment 1 - Working circuit
      • 11 | Projects Kick-Off
        • Trail of Evidence
      • 12 | First experiments
        • Trail of Evidence
        • Building the board
      • 13 | Project Work
        • Trail of Evidence
        • Building scenery
      • 14 | Reframing
        • Trail of Evidence
        • Game ideation
      • 15 | Making fake water
        • Trail of Evidence
      • 16 | Making a cherry blossom tree
        • Trail of Evidence
      • 17 | Expo plan & Clouds
        • Trail of Evidence
      • 18 | Research zine & Coffee soil
        • Research zine
      • 19 | Research zine 2.0
    • Kaz
      • 1 | Kick-Off
      • 2 | Electronics: Connecting Materials
        • Assignment 0 - Zine
        • Assignment 1 - Paper circuits
        • Assignment 2 - Building a speaker
      • 4 | Cutting Supersurfaces
      • 5 | Additive Manufacturing
      • 6 | Untoolkit: Electronic Inputs
      • 7 | Transforming: Molding and Casting with Bioplastics
      • 8 | Untoolkit: Electronic Outputs
      • 11 - 20 | Project: Face Mask Strap
        • 11 | Kick-Off / Pitch
        • Trail of Evidence
        • 15 | Midterm presentation
    • Kim
      • 1 - Introweek
        • Discussion notes
        • Try out zine - Week 1
      • 2 - Electronics: Connecting Materials
        • Zine - Week 2
      • Zine - Week 3
      • 4 - Cutting Supersurfaces
        • The making of: The Sample Book
        • Dense - Clear final sample book
        • Zine - Week 4
      • 5 - Additive Manufacturing
        • Understanding Fusion 360
        • Understanding Cura
        • Understanding the 3D Printer
        • Zine - Week 5
      • 6 - Coronaweek Untoolkit: Electronic Inputs
        • LDR LED connection with Arduino
        • Zine - Week 6
      • 7 - Coronaweek Transforming: Molding and Casting with Bioplastics
        • Material properties sheet + Experiential toolkit
        • Future Bioplastic concept
        • Zine - Week 7
      • 8 - Untoolkit: Electronic Outputs
        • Output swatch
        • Zine - Week 8
      • Project Page Biodegradable Packaging Bags
      • 11 - Project proposal week
        • Trial of evidence week 11
      • 12&13 - Project Bioplastic Consumables
        • Trial of evidence week 12&13
      • 14 - Reframing week
        • Trial of evidence week 14
      • 15 - Project work
        • Trial of evidence week 15
      • 16 - Reframing and expo prep
        • Trial of evidence week 16
        • 16 - The first test
      • Material Sample 1
      • 17 - Project work
        • 17 - Ironing a bioplastic bag
        • 17 - New method for sticking a bioplastic bag together
        • 17 - How to compost?
        • Trial of evidence week 17
      • 18 - Trial of Evidence
      • 19 - Trial Of Evidence
      • 20 - Trial Of Evidence
      • 21 - Final Expostion
    • Laura
      • Week 1: Kick off
      • Week 2: Electronics: connecting materials
      • Week 4: Cutting Supersurfaces
      • Week 5: Additive Manufacturing
      • Week 6: Untoolkit: Electronic inputs
      • Week 7: Transforming Molding and Casting with Bioplastics
      • Foam For Material Activists
        • How to protect?
        • To find a material
        • Foam
        • Trail of Evidence
        • Midterm presentations
    • Summer
      • Foto's
      • Midterm presentation
      • Project: Stop touching
        • Project Proposal
        • Inspirational projects
      • Cutting Supersurfaces
      • Additive Manufacturing
      • Molding and Casting with Bioplastics
        • Creating natural dyes
        • Created bioplastics
      • Electronic input
      • Electronic output
    • Thijs
      • Week 1 - Kickoff
      • Week 2 - Electronics : connecting materials
      • Week 2 - Workshop : debugging circuits
      • Week 2 - Making a speaker
      • Week 3 - Processes & Collaboration
      • Week 4 - Cutting supersurfaces
      • Week 4 - Zine editor
      • Week 5 - Additive manufacturing
      • Week 6 - Untoolkit: Electronic Inputs
      • Week 7 - Transforming: Molding and Casting with Bioplastics
        • Ma2E4 Toolkit
        • Future applications & reflection
      • Week 8 - Untoolkit : electronic outputs
      • Week 11 - Project kickoff
      • Week 12 - First experiments
      • Week 13 - Project work
      • Week 14 - Reframing & trail of evidence
        • Reframing : additional research
        • Shopping list
        • Testing bioplastic material
      • Week 15
      • Weeks 15 - 20
      • Expo prep
  • CLASS NOTES
    • Zine documentation (collaborative doc)
    • Discussions week 2-8
      • Week 02 - Connecting Materials
      • Week 04 - Cutting Supersurfaces
      • Week 05 - Additive Manufacturing
      • Week 06 - Untoolkit Electronics Inputs
      • Week 07 - Transforming Bioplastics
Powered by GitBook
On this page
Export as PDF
  1. Coursework
  2. Anoush
  3. Week 1-8

Week 1 | Kick-off

The first week of the minor Makers Lab 2020 consisted some workshops and excursions to get to know our class and understand the definition of a maker.

PreviousWeek 2 | Electronics: Connecting MaterialsNextDaniël

Last updated 5 years ago

Text zine

UV printer

Ways to hurt yourself

  • Niet naar de laser kijken tijdens het printen.

  • Pas op met het sluiten van de klep dat je vingers daar niet tussen komen.

Ways to hurt the machine

  • Haal je print er pas uit als er op het schermpje van de UV printer staat "PRINT READY".

  • De klep altijd dicht laten, zelfs als de UV printer niet gebruikt wordt. Door het open laten kan de inkt in de cartridges uitdrogen.

Ways to annoy others

  • Niet printen als er niks in zit.

  • Als de printer aangeeft dat de inkt op is, melden bij een leidinggevende. Alleen een leidinggevende mag de cartridge vervangen.

  • Reserveer de UV printer van te voren om er zeker van te zijn dat je hem kunt gebruiken.

  • Leg je voorwerp waar je op print binnen de kader.

Andere belangrijke zaken

  • Draai het voorwerp waarop geprint wordt 180 graden als je hem op het bedje legt.

  • Er ligt een handleiding naast de computer waarin staat hoe je vanuit Illustrator kunt printen.

  • Voor het beste resultaat op vlakke materialen printen.

  • Zorg ervoor bij het afplakken dat er geen tape uitsteekt ivm met hoogte waarop geprint gaat worden.

  • Er is een bak achter de computer met schoonmaakmiddelen voor als er op het bed geprint is.

  • Zorg ervoor dat de vacuüm zuiger aan staat.

Oven & lijnbuigmachine

Ways to hurt yourself

  • Gebruik bij de oven de handschoenen als je er iets uit wilt halen.

  • Raak de draad bij de lijnbuigmachine nooit aan.

Ways to hurt the machine

  • Zet de oven en de lijnbuigmachine uit na gebruik.

  • Er mag geen materiaal in de oven dat chloor bevat. Als je het niet zeker weet vraag het aan begeleiding.

  • Plexiglas op maximaal 180 graden bakken. Er staat een streep aangegeven op de oven.

Ways to annoy others

  • Leg de handschoenen op de juiste plek terug.

  • Roosters liggen onder de oven.

  • Als er restjes op de roosters zitten maak dat dan schoon. De restjes kunnen anders in het werk terecht komen van de volgende gebruikers. Doe dit evt. met een staalborstel.

Andere belangrijke zaken

  • Rechts in de hoek naast de oven staat bakpapier.

  • Je hebt weinig tijd met afkoelen van materiaal. Als je iets moet buigen doe dat binnen 20 seconde.

  • Bij het gebruik van de lijnbuigmachine buig altijd naar jezelf toe.

  • Aan en uit knop van de oven, rood = aan, groen = uit.

  • Gele stip op de oven bij de timer is oneindig tijd.

  • Er is een thermometer in de oven.

  • Als je iets niet weet, vraag het dan aan begeleiding.

Tuesday morning we did a letterpress workshop at the Grafische Werkplaats in Amsterdam.

We made posters in duos with old letterpress machines that you operate by hand. I liked the experience because this technique is no longer used in contemporary life. We have been creatively creating new letters by using different shapes and characters.

Wednesday morning we went with a large group of the class to the textile museum in Tilburg. Here we got acquainted with the first textile machines that existed and we did a workshop. At the workshop, we learned an ancient Japanese sewing technique that was used to beautifully repair old, worn out clothes. The technique was called Sashiko.

Reflection

I liked the fact that in the first week of the minor we had a number of excursions to, in my opinion, interesting places. I completely understood why we went to the textile museum and the letterpress workshop. Understanding these old techniques also helps me to understand how fast the development of machines is actually going. These are also all forms of making what broadened my field about who or what someone makes a maker.

270KB
Safetyzine.pdf
pdf
Safety zine